台湾世界级机械磨潤工程专家--游憲一 [复制链接]

8' WLm  

8' WLm  

論文發表 (Publications)

A. 期刊論文

1. You, H. I., and Lu, S. S., 1987, "Inertia Effect in Hydrodynamic Lubrication with Film Rupture," ASME J. of Tribology，Vol. l09, pp. 86-90.(SCI) 8' WLm  
   
2. You, H. I., and Koh, J. C. Y., 1987, "A Numerical Analysis of Heat Transfer in Microstructures," J. of College of Science and Engineering, National Chung-Hsing University. 8' WLm  
   
3. You, H. I., and Lu, S. S., 1988, "The Effect of Fluid Inertia on the Operating Characteristics of a Journal Bearing," ASME J. of Tribology, Vol.110, pp.499-502.(SCI) T{v(B["!$  
   
4. You, H. I., 1988, "Effect of Geometry on Hydrodynamic Lubrication of a Convergent-Divergent Bearing Considering fluid Inertia," Society of Theoretical and Applied Mechanics of the R.O.C., Vol.4, No.2, pp. 107-113. T{v(B["!$  
   
5. You, H. I., 1989, "Experimental Determination of Heat Transfer Coefficient Between a Microstructure and Fluid," International Communication in Heat and Mass Transfer, Vol. 16, No.4, pp.537- 546. T{v(B["!$  
   
6. You, H. I., 1990, "The Lubrication of a Lightly Loaded Sliding Cylinder in Normal Motion," ASME J. of Tribology, Vol.112, pp.153-155.(SCI) T{v(B["!$  
   
7. You, H. I., 1991, "A Transient analysis of a Cylindrical Slider Started impulsively," Journal of the Chinese Institute of Engineering, Vol. 14, N0.2, pp.223-230. T{v(B["!$  
   
8. You, H. I., and Lu, S. S., 1991, "Effect of Fluid Inertia on the Operating characteristics of a Cylinder-Plane Bearing," STLE Tribology Trans., Vol.34, No.l, pp.59-62﹒ T{v(B["!$  
   
9. You, H. I., 1991, "The Stepwise Transient Analysis of a Lubricating Film in Combined Translating and Normal Motion," Journal of the Chinese Society of Mechanical Engineers, Vol.12, No.6, pp.601-610. T{v(B["!$  
   
10. You, H. I., and Hsia,J.H.,1995,"The Influence of Friction-Speed Relation on the Occurrence of Stick-Slip Motion," ASME J. of Tribology, Vol.117, pp.450-455.(SCI) T{v(B["!$  
    
11. You, H. I., and Yu, C. S., 1997, "Effect of Surface Roughness on Low Sliding Friction and Dry Surfaces with Elastic Contact," J. of CSME, Vol. 18, N0.4, pp.371-377.(EI) T{v(B["!$  
    
12. You, H. I., and Shyr, D. M., 1997, "investigation of Friction and Wear Properties of Polyethylene Sliding against Metal Surface," J. of CSME, Vol.18, No.5, pp.477-483.(EI) T{v(B["!$  
    
13. You, H. I., and Lin, W. Y., 1997, "Stiction Effect of Lubricated Film on Friction Properties and Stick-Slip Motion in Two Planar Contact Surfaces," J. of CSME, Vol.18, No.6, pp.579-585.(EI) T{v(B["!$  
    
14. You, H. I., and Chang, C. H.,1 997, "Determination of Flow Properties in Non-Darcian Flow," ASME J. of Heat Transfer.Vol.119, No. l, pp. 190-192.(SCI) T{v(B["!$  
    
15. You, H. I., and Chang, C. H., 1997, "Numerical Prediction on Heat Transfer Coefficient of Pin-Fin Channel Flow," ASME J. of Heat Transfer. Vol.119, No.4, pp.840-843.(SCI) T{v(B["!$  
    
16. You, H. I., and Chung, S. C., 1998, "Friction Induced Self-Excited Vibration in Dry and Lubricated Sliding Contact," J. of CSME, Vol.19, No.4, pp.411-416.(EI) T{v(B["!$  
    
17. You ,H. I.，and Song, J. S., 1998, "Heat Transfer Analysis of Non-Darcian Flow in Local Thermal Non-Equilibrium," J. of CSME,Vol19, No.6, pp. 75-80.(EI) T{v(B["!$  
    
18. You, H. I., Shyy, J. H., and Hwang, H.Y., 1999, "Effects of Surface Roughness on the Elastic-Plastic Contact Between the Fractal Rough Surface and a Plane," J. of CSME, Vol.20, No.3, pp. 247-255.(EI) T{v(B["!$  
    
19. You, H. I., and Hwang, H. Y., 1999, "Effects of Surface Conformity on the Contact Between Two Rough Surface," J. of CSME, Vol.20, No.3, pp.309-315.(EI) T{v(B["!$  
    
20. You, H. I., and Chung, C. H., 2000, "Experimental Study on Heat Transfer and Friction in Pin Fin Channel Flow," J. of the Chinese Institute of Engineers, Vol. 23, No.1, pp.117-123.(SCI) T{v(B["!$  
    
21. You, H. I., and Yang, M. Y., 2000, “Investigation of Ideal Machining Conditions from The Study of Chip Geometry During Turning Operation,” J. of Engineering, National Chung-Hsing University, Vol.11, No.1, pp.17-23. T{v(B["!$  
    
22. You, H. I., and Lee, K.Y., 2001, “Investigation of Metallic Surface Energy Due to the Effects of Surface roughness and Material Hardness,” CSME, Vol. 22, No.3, pp.203-208. (EI)

23. T{v(B["!$  
You, H. I., and Liou, S. D., 2002, “Removal by Liquid Immersion of Small Particles from a Smooth Surface,” CSME, Vol.23, No.5, pp.451-457. (EI) T{v(B["!$  

24. T{v(B["!$  
Jerry C. T. Su, H. I., You, and J. X. Lai, 2003, “Numerical Analysis on Externally Pressured High-Speed Gas-Lubricated Porous Journal Bearings,” Industrial Lubrication and Triblogy, Vol. 55, No.5, pp.244-250. T{v(B["!$  

B. 研討會論文

1. You, H. I., and Lu, S. S., 1985,"Inertia Effect in Hydrodynamic Lubrication of a Steadily Moving Surface over a Stationary Surface," The 9th. National Conference on Theoretical and Applied Mechanics, Taipei, Taiwan. T{v(B["!$  
   
2. You, H. I., and Lu, S. S., 1986, "The Influence of Fluid Inertia and Surface Tension on the hydrodynamic Lubrication of a Journal Bearing," CSME, Proceeding of the 3th National Conference on Mechanical Engineering-Heat Flow, Chunh-Li, Taiwan.
3. You, H. I., and Koh, J. C. Y., 1987, "Analysis of Heat Transfer of Porous Material in a Two-Dimensional Channel," The 11th National Conference on Theoretical and Applied Mechanics, Chung-Li Taiwan. T{v(B["!$  
   
4. You, H. I., 1988, "Effect of Geometry on Hydrodynamic Lubrication of a Convergent-Divergent Bearing Considering Fluid Inertia," Society of Tribologists and Lubrication Engineers, The 43rd Annual Meeting, Cleveland, Ohio, U.S.A. T{v(B["!$  
   
5. You, H. I., 1989, "A New Computational Algorithm for the Transient Analysis of a Lubricating Film," Proceeding of U.S./Taiwan Joint Symposium on Tribology, National Taiwan University. T{v(B["!$  
   
6. You, H. I., 1990, "The Stepwise Transient Analysis of a Lubricating Film Started Impulsively," Japan International Tribology Conference, Nagoya. T{v(B["!$  
   
7. You, H. I., and Hsia, J. H., 1993, "The Influence of Friction-Speed Relation on the Occurrence of Stick-Slip Motion," CSME, Proceeding of the 10th National Conference on Mechanical Engineering-Heat Flow, Taiwan. T{v(B["!$  
   
8. You, H. I., and Song, J. S. 1994, "Heat Transfer Analysis of Non-Darcian Flow in Local Thermal Non-equilibrium with Porous Medium," CSME, The llth National Conference on Mechanical Engineering , Tai-Chung, pp. 543-550. T{v(B["!$  
   
9. You, H. I,and Lin, W. Y. 1995, "Sliding Friction and Stick-Slip Motion of Two Contact Surfaces in Dry and Lubricated Conditions," CSME, Proceedings of the l2th National Conference on Mechanical Engineering, pp.837-842. T{v(B["!$  
   
10. You, H. I., and Chang, C. H., l996, "Numerical Study on Flow and Heat Transfer Behavior of Pin-Fin Porous Medium Flow," The 2Oth National Conference on Theoretical and Applied Mechanics, Taipei Taiwan, pp.50-56. T{v(B["!$  
    
11. You, H. I., and Chang, C. H., 1997, "Experimental Study on Heat Transfer and Friction in Pin Fin Channel Flow," The 2lth National Conference on Theoretical and Applied Mechanics, Tai-Chung, Taiwan, pp.105-110. T{v(B["!$  
    
12. You, H. I., and Chung, S. C., 1997, "Friction Induced Self-Excited Vibration in Dry and Lubricated Sliding Contact," CSME, Proceeding of the 14th National Conference on Mechanical Engineering-Heat Flow, pp.536-540. T{v(B["!$  
    
13. You, H. I., Shyy, J. H., and Hwang, H. Y., l998, "The Elastic-Plastic Contact Between the Fractal Simulated Rough Surface and a Plane," CSME, Proceeding of the l5th National Conference on Mechanical Engineering-Heat Flow,pp.689-696. T{v(B["!$  
    
14. You, H. I., and Hwang, H. Y., 1998, "Effects of Surface Conformity on the Contact Between Two Rough Surface," CSME, Proceeding of the 15th National Conference on Mechanical Engineering-Heat Flow, pp. 72 T{v(B["!$